• with radial clamping hub both sides
• simple installation
• compensations of sfaft misalignements - low restoring forces
• Torque range: 6 - 12 Nm
• Shaft diameter: D1= 8 - 19 (24) mm / D2= 8 - 16 mm
- Coupling type
- Safety Coupling for direct drives
- Which drive type do you need?
- direct
- Which maximum torque is required? [Nm]
- 12
- Shaft distance [mm]
- 50
- Outer diameter [mm]
- 52,5
- Total length [mm]
- 81
- Hub type
- Clamping Hub
- Operating temperatures
- 200
Deutsch
English