• with radial clamping hub both sides
• simple installation
• compensations of sfaft misalignements - low restoring forces
• Torque range: 1 - 2 Nm
• Shaft diameter: D1= 5 - 10 mm / D2= 5 - 14 mm
- Coupling type
- Safety Coupling for direct drives
- Which drive type do you need?
- direct
- Which maximum torque is required? [Nm]
- 2
- Shaft distance [mm]
- 35
- Outer diameter [mm]
- 40,5
- Total length [mm]
- 62,5
- Hub type
- Clamping Hub
- Operating temperatures
- 200