• with radial clamping hub both sides
• simple installation
• compensations of sfaft misalignements - low restoring forces
• Torque range: 8 - 15 Nm
• Shaft diameter: D1= 8 - 32 mm / D2= 10 - 25,4 mm
- Coupling type
- Safety Coupling for direct drives
- Which drive type do you need?
- direct
- Which maximum torque is required? [Nm]
- 15
- Shaft distance [mm]
- 56
- Outer diameter [mm]
- 69
- Total length [mm]
- 94,5
- Hub type
- Clamping Hub
- Operating temperatures
- 200