• with radial clamping hub on both sides
• easy to install - plug in design
• compensation of shaft misalignments - oscillation dampening
• Torque range: 70 - 230 Nm
• Shaft diameter: D1= 20 - 42 mm / D2= 24 - 42 mm
- Coupling type
- Safety Coupling for direct drives
- Which drive type do you need?
- direct
- Which maximum torque is required? [Nm]
- 230
- Shaft distance [mm]
- 75
- Outer diameter [mm]
- 115
- Total length [mm]
- 134
- Hub type
- Clamping Hub
- Operating temperatures
- 90
- Vibration dampening
- Yes