• with conical clamping hub on both sides
• compensations of shaft misalignments - low restoring forces
• high balance quality - for small shaft diameters
• Torque range: 6.000 - 9.000 Nm
• Shaft diameter: D1= 70 - 130 mm / D2= 70 - 120 mm
- Coupling type
- Safety Coupling for direct drives
- Which drive type do you need?
- direct
- Which maximum torque is required? [Nm]
- 9000
- Shaft distance [mm]
- 178
- Outer diameter [mm]
- 243
- Total length [mm]
- 336
- Hub type
- Clamping Hub
- Operating temperatures
- 200